EC-10 Epoxy Primer
Two-pack epoxy primer designed for superior corrosion protection to ferrous substrates dries to a semi-gloss finish. Has excellent surface properties allowing for maximum adhesion of a wide variety of topcoat systems.
A high solid, high opacity, medium build product, allows for single coat application in most circumstances.
Typically applied to shot-blasted steel, skips, fabrications, plant, and machinery.
Key Features
- Excellent adhesion properties
- Suitable basecoat for 2 pack acrylics
- High abrasion/corrosion resistance
- High solids content
Composition
A 2 pack epoxy system containing anticorrosive additives for enhanced corrosion performance.
Solids:
Solids by weight: 65-70%
Solids by volume: 55-60%
VOC Content
400-450 grams per litre
Theoretical coverage
Approximately 8-10 square meters per litre at 100-micron wet film thickness
Typical film thickness
100-micron wet film will leave 65/70 micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in approximately 1 hour
Dry to handle in approximately 4 hours
Full cure in 7 days
Overcoating at 18°C
24 hours after application
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-12 SBP6 TC
Key Features
- Excellent adhesion properties
- Quick handling time
- Superior corrosion resistance
- Can be overcoated with a wide range of finishes
Composition
A 2 pack epoxy system blended with quick-release solvents, containing anti-corrosive additives for enhanced corrosion performance.
Solids
Solids by weight: 50-55%
Solids by volume: 40-45%
VOC Content
500-550 grams per litre
Theoretical coverage
Approximately 8-10 square meters per litre at 100-micron wet film thickness
Typical film thickness
100-micron wet film and 50-micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in 20-30 minutes
Dry to handle in 1-2 hours
Overcoating at 18°C
24 hours after application
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-18 2 Pack Blast
A modified polyurethane alkyd system designed for application to pre-primed metals such as fabrications and machinery.
Formulated on light stable pigments designed to resist fading in exterior situations make it ideal for use as a Top Coat.
Available in gloss satin finish.
Key Features
- Low odour product
- Tough, durable PU coating
- Available in high gloss or satin finish
Composition
A medium/long oil PU alkyd system containing light stable pigments and combination driers to assist curing throughout the film.
Solids
Solids by weight: 50-55%
Solids by volume: 40-45%
VOC Content
500-550 grams per litre
Theoretical coverage
Approximately 8-10 square meters per litre at 100-micron wet film thickness
Typical film thickness
100-micron wet film dries to 50-micron dry film thickness
Flashpoint
Above 32°C
Drying time at 18°C
Touch dry in 2 hours
Dry to handle in 2-3 hours
Full cure: 7 days
Overcoating at 18°C
After 24 hours of application
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-24 Topcoat
A quick air-drying topcoat typically applied to metal fabrications, flanges, wrought iron gates, and conveyor rollers.
Has excellent surface drying properties allowing for quick handling times in production situations. A medium solids product with high opacity. Dries to a high gloss finish.
The pigments used in this product have high light fastness to reduce colour fade, increasing exterior lifetime.
Key Features
- Quick air-drying
- High opacity product
- High gloss level
- Lightfast pigmentation
Composition
A short oil alkyd system containing high opacity, light stable pigments for exterior use.
Solids
Solids by weight: 35-40%
Solids by volume: 30-35%
VOC Content
600-650 grams per litre
Theoretical coverage
Approximately 8 square meters per litre at 100-micron wet film thickness
Typical film thickness
100-micron wet film and 35-micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in 20-30 minutes
Dry to handle in 1-2 hours
Overcoating at 18°C
Within 2 hours or after 24 hours of application.
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-28 Primer
A primer designed for corrosion protection to ferrous substrates dries to a matt finish. Has excellent surface properties allowing for maximum adhesion of a wide variety of topcoat systems.
A medium solid, high build product with high opacity enables a single coat application in most circumstances, reducing the need for multiple coats.
Typically applied to shot-blasted steel, skips, fabrications, and stillages.
Key Features
- Quick air-drying
- Anti-corrosive pigmentation
- High build
- Can be over-coated with a wide range of finishes
Composition
A short oil alkyd system containing anticorrosive additives for enhanced corrosion performance.
Solids
Solids by weight: 60-65%
Solids by volume: 45-50 %
VOC Content
500-550 grams per litre
Theoretical coverage
Approximately 10 square meters per litre at 100-micron wet film thickness
Typical film thickness
100-micron wet film and 60-micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in 20-30 minutes
Dry to handle in 1-2 hours
Overcoating at 18°C
Minimum: within 2 hours of application
Maximum: after 24 hours
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-30 PU floor
A modified polyurethane alkyd system designed for application to suitably prepared floors. Once fully cured this product will prevent the ingress of dirt, grime, and oils allowing for easy cleaning.
Typically applied to Mid-low traffic areas, can be used for line marking, walkways, and domestic garage floors.
Suitable for the addition of anti-slip aggregates, these can be mixed with the paint or broadcast between coats.
Available in a gloss and satin finish.
Key Features
- Easy to use, brush/roller
- Available in gloss/satin finish
- Polyurethane resin system
- Ideal for general maintenance and mid-low traffic areas
Composition
A medium/long oil PU alkyd system containing light stable pigments and combination driers to assist curing throughout the film.
Solids
Solids by weight: 50-60%
Solids by volume: 40-45%
VOC Content
350-400 grams per litre
Theoretical coverage
Approximately 8-10 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 micron wet film will dry to approximately 60 micron dry film thickness
Flashpoint
Above 32°C
Drying time at 18°C
Touch dry in 2-3 hours
Dry for foot traffic: overnight- 24 hours
Full cure: 7 days
Overcoating at 18°C
24 hours after application
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-34 2 pack FC
A 2 pack epoxy floor coat designed to have exceptional adhesion, abrasion and chemical resistance properties.
The tough, durable nature of this product makes it ideal for high traffic areas or areas where chemical resistance is required.
Typical applied to new power floated concrete floors, brick, masonry and metal floors.
Dries to a semi-gloss finish.
Key Features
- Suitable for high traffic zones
- Wide range of chemical resistance
- High abrasion resistance
- Excellent adhesion
Composition
A 2 pack epoxy system containing light stable pigments and a blend of quick drying solvents.
Solids
Solids by weight: 65-70%
Solids by volume: 55-60%
VOC Content
400-450 grams per litre
Theoretical coverage
Approximately 8-10 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 micron wet film well dry to leave 65/70 micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in approximately 1-2 hours
Dry for foot traffic approximately 14-20 hours
Full cure in 7 days
Overcoating at 18°C
24 hours after application
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-48 One Coat
A single coat primer/finish designed to give increased corrosion protection to ferrous substrates dries to a satin finish.
This is a medium solids/medium VOC product with excellent opacity enabling a single coat application in most circumstances, reducing the need for a primer or undercoat.
Typically applied to shot-blasted steel, skips, fabrications, and stillages
Key Features
- Quick air-drying
- Anti-corrosive properties
- High quality satin finish
- Excellent sag resistance
Composition
A short oil alkyd system pigmented with light stable pigments and anticorrosive additives.
Solids
Solids by weight: 50-55%
Solids by volume: 40-45%
VOC Content
500-550 grams per litre
Theoretical coverage
Approximately 8-10 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 micron wet film and 50 micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in 20-30 minutes
Dry to handle in 1-2 hours
Overcoating at 18°C
Minimum: Within 2 hours of application
Maximum: After 24 hours
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-50 MDF
A single coat primer designed for industrial use on MDF and wood, dries to an intense white matt finish. This product exhibits excellent surface properties allowing easy sanding if required.
Due to the penetration properties the primer prevents moisture ingress into the MDF or wood which will reduce warping.
Fast drying making it ideal for use in high production situations where quick handling times are a necessity.
Supplied ready for use on site, ideal for skirting boards, architraves, doors and windowsills etc.
Key Features
- High opacity primer
- Extremely quick drying
- Ideal for spray application
- Excellent adhesion to MDF and wood
Composition
A modified acrylic system utilising a quick release solvent blend to obtain a fast, tack free finish. Formulated with high opacity pigments for maximum coverage at a low film weight.
Solids
Solids by weight: 50-55%
Solids by volume: 33-35%
VOC Content
550-600 Grams per litre
Theoretical coverage
Approximately 8 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 Micron wet film and 35 micron dry film thickness
Flashpoint
Below 21°C
Drying time at 18°C
Touch dry in 10 minutes
Dry to handle in 1 hour
Overcoating at 18°C
Within 2 hours of application
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-64 Low VOC
A single coat product ideal for use in high volume manufacturing environments, where VOC emission levels are monitored.
This is a high solid, high build product with excellent opacity and adhesion characteristics which can be overcoated with a wide array of topcoats if desired.
Can be applied directly to most ferrous substrates requiring minimal surface preparation.
Typically applied to shot-blasted steel, skips, fabrications, and stillages.
Key Features
- Designed for high volume use
- Compliant for users over 15 tonnes per year
- Excellent durability
- Anti-corrosive pigmentation
- Quick air-drying satin finish
Composition
A modified alkyd system containing light stable pigments and anti corrosvie additives.
Solids
Solids by weight: 72%
Solids by volume: 59%
VOC Content
275-350 grams per litre
Theoretical coverage
Approximately 6-8 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 micron wet film and 70-75 micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in 20-30 minutes
Dry to handle in 1-2 hours
Overcoating at 18°C
Minimum: Within 2 hours of application
Maximum: After 24 hours
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-85 Vinyl Clad
A solvent-based system for use on exterior cladding dries to a satin finish. Offers excellent protection to metal from corrosion, UV degradation, and environmental pollution.
Available in a variety of colours and can be formulated for corporate colours if specified.
Key Features
- Tough, flexible coating
- UV resistant finish
- Quick-air drying
- Highly resistant vinyl coating
Composition
A solvent-based Vinyl system formulated with high opacity, light stable pigments, and anti-corrosive additives.
Solids
Solids by weight: 45-50%
Solids by volume: 35-40%
VOC Content
600-650 Grams per litre
Theoretical coverage
Approximately 6-8 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 Micron wet film will dry to 40 micron dry film thickness
Flashpoint
Above 32°C
Drying time at 18°C
Touch dry in 2 hours
Full cure in 24-48 hours
Overcoating at 18°C
24 hours after application
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-90 Pliolite mason
A solvent-based acrylic copolymer system for use on exterior and interior masonry finishes. Offers excellent protection to stonework, render, stucco, and brick/masonry, dries to a semi-gloss/matt finish.
This product exhibits excellent water resistance and exterior durability, over and above the performance of normal acrylic-based masonry paints.
Available in white, magnolia, and light grey. Other colours may be produced if specified.
Key Features
- Quick-drying time
- Easy to apply via brush, spray, or roller
- Flexible coating
- Good exterior durability
Composition
A solvent-based modified acrylic system formulated with high opacity, light stable pigments.
Solids
Solids by weight: 50-55%
Solids by volume: 40-45%
VOC Content
550-600 grams per litre
Theoretical coverage
Approximately 6-8 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 micron wet film will dry to leave 45/50 micron dry film thickness
Flashpoint
Above 32°C
Drying time at 18°C
Touch dry in 2 hours
Full cure 24-48 hours
Overcoating at 18°C
Can be overcoated 24 hours after original application
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-97 Sealer
A single coat acrylic-based product designed to offer protection to exterior PIC, block paving, and natural stone. Easy to apply via brush or medium pile polyester roller for DIY or professional use. Please specify if required in gloss or satin finish.
As this product is quick-drying it allows for fast reinstatement of treated areas. This product can be overcoated multiple times, we do not recommend on inclines unless slip-resist has been added to the product. Slip resist can be incorporated or purchased separately.
Typical uses include drives, patios, and walkways.
Key Features
- For use on PIC, block paving & natural stone.
- Protects against oil spills, grease, and petrol
- Available in gloss or satin
- Easy application
- Enhances substrate colour
Composition
A thermoplastic acrylic dissolved in solvent to deposit a clear, durable coating upon drying.
Solids
Solids by weight: 18-20%
Solids by volume: 16%
VOC Content
800-850 grams per litre
Theoretical coverage
Approximately 2 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 micron wet film will leave 20 micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in 20-30 minutes
Dry for foot traffic 4 hours
Dry for Vehicle traffic 24 hours
Overcoating at 18°C
Is possible 1-2 hour after application
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-98 Penetrating sealer
A unique non film forming product designed to give protection to exterior block paving and natural stone while being virtually invisible to the eye.
Once applied the sealer penetrates into the pores of the stone or block giving protection against ingress of moisture, oils and grease. This product will not change the surface profile of the stone or block so no slip resist is required.
Easy to apply via brush for DIY or professional use.
Key Features
- Stain-resistant
- Invisible to the eye
- Easy application
- Non-film forming technology
Composition
A special polymer blend dissolved in white spirt resulting in a thin clear liquid designed to penetrate into natural stone, concrete and blocks.
Solids
Solids by weight: 10%
Solids by volume: 10%
VOC Content
500-550 Grams per litre
Theoretical coverage
Approximately 4-5 square meters per litre
Typical film thickness
Not applicable due to the penetrating nature of the product
Flashpoint
+32°C
Drying time at 18°C
Touch dry in 2 hours
Dry for foot traffic 2 hours
Dry for Vehicle traffic 12 hours
Overcoating at 18°C
Can be overcoated 24 hours after initial application
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-60 WB Transit Primer
A single coat, water-based dipping primer designed for industrial use on cast iron and ferrous metal substrates. Dries to a semi-gloss finish.
Ideal for use where health and safety are a major concern and the use of solvent-based products is prohibited.
This is an air-drying product that can be forced dried at 40-80°C to facilitate faster drying times if required. Contains both long-term corrosion inhibitors and anti-flash rust additives to maximise corrosion protection.
Key Features
- Anti-corrosive properties
- Air drying/force drying product
- Ideal for dipping application
- Low odour product
Composition
A water based modified acrylic system. Incorporates inert fillers, anti-corrosive additives and high quality, light stable pigments.
Solids
Solids by weight: 40-45%
Solids by volume: 35-40%
VOC Content
Not applicable
Theoretical coverage
Approximately 6-7 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 Micron wet film thickness will dry to 45 micron dry film thickness
Flashpoint
Not applicable
Drying time at 18°C
Touch dry in 1 hour
Dry to handle in 2-3 hours
Drying time at 60°C
Touch dry in 10 minutes
Dry to handle in 30 minutes
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-70 WB Wood Primer
Solids
Solids by weight: 50-55%
Solids by volume: 40-45%
VOC Content
500-550 Grams per litre
Theoretical coverage
Approximately 8-10 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 Micron wet film and 50 micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in 20-30 minutes
Dry to handle in 1-2 hours
Overcoating at 18°C
Minimum: Within 2 hours of application
Maximum: After 24 hours
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-72 WB Wood Topcoat
Solids
Solids by weight: 50-55%
Solids by volume: 40-45%
VOC Content
500-550 Grams per litre
Theoretical coverage
Approximately 8-10 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 Micron wet film and 50 micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in 20-30 minutes
Dry to handle in 1-2 hours
Overcoating at 18°C
Minimum: Within 2 hours of application
Maximum: After 24 hours
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-90 WB Silicate Masonry
Solids
Solids by weight: 50-55%
Solids by volume: 40-45%
VOC Content
500-550 Grams per litre
Theoretical coverage
Approximately 8-10 square meters per litre at 100 micron wet film thickness
Typical film thickness
100 Micron wet film and 50 micron dry film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in 20-30 minutes
Dry to handle in 1-2 hours
Overcoating at 18°C
Minimum: Within 2 hours of application
Maximum: After 24 hours
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-95 Alkali Cleaner
An alkali-based cleaning product for use by professional or DIY on exterior concrete, wood, block paving and natural stone surfaces. Gloves and googles should be worn at all times during application.
Highly concentrated for powerful cleaning results, may be diluted up to 50% depending upon severity of cleaning required. Intense foaming action when agitated designed to help with dirt removal.
For best results simply apply, agitate and allow to rest for 10 minutes before power washing from the surface. Do not apply to painted areas at full concentration.
Key Features
- Removes ground in dirt & grime
- Loosens moss & lichens
- Easy application
- High concentration – Dilutable with water
Composition
An alkali based cleaner with a combination of powerful surfactants and foaming agents.
Appearance
Red/Orange Liquid
PH
10
Theoretical coverage
Approximately 100 square meters per 20 litres
Flash point
Not Applicable
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-92 WB Emulsions
Solids
Solids by weight: 50-55%
Solids by volume: 40-45%
VOC Content
500-550 Grams per litre
Theoretical coverage
Approximately 8-10 square meters per litre at 100 micron wet film thickness
Typical film thickness
Approximately 8-10 square meters per litre at 100 micron wet film thickness
Flashpoint
22-32°C
Drying time at 18°C
Touch dry in 20-30 minutes
Dry to handle in 1-2 hours
Overcoating at 18°C
Minimum: Within 2 hours of application
Maximum: After 24 hours
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-95EN Enviro Clean
An environmentally friendly, bio-degradable cleaning product for use by professional or DIY on exterior concrete, wood, block paving and natural stone surfaces. Gloves and googles should be worn at all times during application.
Highly concentrated for powerful cleaning results, can be diluted with water if required. Intense foaming action when agitated to assist with dirt removal.
Specifically engineered to have a reduced impact on the environment, this product is manufactured using the latest, cutting edge cleaning technology. Will breakdown into harmless natural compounds once exposed to the environment.
Key Features
- Removes ground in dirt & grime
- Loosens moss & lichens
- Easy application
- Biodegradable
Composition
A specially formulated blend of biodegradable cleaning chemcials, powerful surfactants and foaming agents .
Appearance
Green
PH
7
Theoretical coverage
100 square meters per 20 litres
Flash point
Not Applicable
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-95EN Test
new aerosol formulation
Key Features
- Removes ground in dirt & grime
- Loosens moss & lichens
- Easy application
- Biodegradable
Composition
A specially formulated blend of biodegradable cleaning chemcials, powerful surfactants and foaming agents .
Appearance
Green
PH
7
Theoretical coverage
100 square meters per 20 litres
Flash point
Not Applicable
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.
EC-97 WB Sealer
Solids
Solids by weight: 50-55%
Solids by volume: 40-45%
VOC Content
Not applicable
Theoretical coverage
Approximately 8-10 square meters per litre at 100 micron wet film thickness
Typical film thickness
Approximately 8-10 square meters per litre at 100 micron wet film thickness
Flashpoint
Not applicable
Drying time at 18°C
Touch dry in 20-30 minutes
Dry to handle in 1-2 hours
Overcoating at 18°C
Minimum: Within 2 hours of application
Maximum: After 24 hours
Please note all information supplied is theoretical and will vary depending on colour supplied and external conditions.